Pumps

The Jurop LC300 (300 max CFM), LC420 (425 max CFM), and LC520 (520 max CFM) are water cooled, four-vane rotary vane vacuum pumpss suitable for heavy duty operating cycles with high volumetric efficiency and low noise. The LC Series (LC = Liquid Cooled) design is innovative with regards to the liquid cooling system within the vacuum pumps’ housing. The cooling is complete from end plate to end plate. This design allows for the LC pumps to operate at a higher rate of...

Jurop air-cooled PN-series vacuum truck pumps (PN23, PN33, PN58, PN84, PN106, PN155R) are designed to meet any specific requirement and have a wide range of applications that include those in the oilfield, agricultural, industrial, marine and building industry, civil and environment branches, and other environmental field services.  ¯ PN-series Pump Quick Info: • PN23 pump: 92 max  • CFM PN33 pump: 127 max CFM  • PN58 pump: 230 max CFM  • PN84 pump:317 max...

Jurop R260 vacuum pump with CCW or CW rotation and 364 max airflow (CFM).  The Jurop R260 is a rotary vane vacuum pump that is a very popular choice across many industries. It has 4-way valve manifold with internal check valve installed on the pump inlet and continuous duty at 70% vacuum. Ships with two (2) 3" swivel elbows.

The RV series (RV360, RV520) and RVC series (RVC360, RVC210) vacuum pumps are cooled by high efficiency contraposed fans. The airflow reduces the temperature of the internal parts normally subjected to wear. Suitable for heavy-duty operation.. — Summary Pump Information RV360: 360 max CFM, 30 max PSI, 16 HPRV520: 520 max CFM, 30 max PSI, 32 HPRVC360: 360 max CFM, 30 max PSI, 32 HP (Special Price)RVC210: 212 max CFM, 30 max PSI, 10 HP ...

The Moro Kaiser KWP liquid ring truck pump is a low weight liquid ring vacuum pump for suction and pneumatic conveyance of wet and dry material. Air flow options available from 530 to 4120 CFM.KAISER developed the first water ring pump in a light construction for mobile application. In the KWP housing, an eccentric rotor produces a ring of water using centrifugal power. Volume changes in the rotor chambers assure that air is sucked in and compressed. This construction type features high...

Masport air-cooled vacuum pumps (HXL2, HXL3, HXL4, and HXL75) are intended to be used for loading and unloading of liquid material. These pumps are commonly used for liquid waste transport, septic tank cleaning, oil field service work, car wash or grease trap cleaning and many other industrial applications. ...

Masport water-cooled vacuum pumps (HXL75W, HXL400W, HYDRA)  are intended to be used for loading and unloading of liquid material. These pumps are commonly used for liquid waste transport, septic tank cleaning, oil field service work, car wash or grease trap cleaning and many other industrial applications.We also are sometimes able to offer factory remanufactured pumps (based on availability), so be sure check or contact us for inventory status. ...

Masport fan-cooled vacuum pumps (VIPER, TITAN, SIDEWINDER, and COBRA) are intended to be used for loading and unloading of liquid material. These pumps are commonly used for liquid waste transport, septic tank cleaning, oil field service work, car wash or grease trap cleaning and many other industrial applications. ...

Moro M9 (547 cfm), PM200 (678 cfm), PM2000 (833 cfm), PM3000 (1001 cfm), and HM46 (1642 cfm) liquid cooled vacuum pumps are recommended for heavy duty, continuous use applications. ...

Moro AIR Series radiant cooled vacuum pumps are designed to be used in industrial applications that have varying capability requirements. Moro offers three separate AIR Series pumps (PM60A, PM70A, PM80A) to meet these differing application needs. ...

The Moro TURBO series (fan cooled) vacuum pumps utilize dual-fan technology to drastically increase heat dissipation. These pumps are designed to be used in industrial applications that have varying capability requirements. Moro offers four separate TURBO Series pumps (PM70T, PM80T, PM100T, AC5T, PM90T) to meet these differing application needs. ...

The Moro PM80W (424 max CFM) and PM110W (645 max CFM) water cooled vacuum pumps are recommended for tough industrial applications and rewards their owners with trouble-free service and a long pump life.