• Provides Cooled Air to the Dry Bulk Material
  • Compact, Light (150# max), Inexpensive, Small Trailer Footprint
  • Set and Forget: No Extra Work Required
  • Nearly Maintenance-Free Operation
  • Self Sufficient: Requires No External Water, Air, or Electrical Sources
Price: $4,750.74
$4,750.74
In Stock
    Components:


    Update price
    Quantity:
    Item #: 251-058-000
    Availability: In Stock
    Usually ships In 1-2 Business Days

    The B.T.I. air-to-air cooler is available as a universal kit that can install to any pneumatic dry bulk tank, regardless of manufacturer. The cooler kit includes the heat exchanger, electric fans, insulating bushings, fan switch, and thermometers.

    The B.T.I. air-to-air cooler was developed and designed for pneumatic dry bulk tank trailers in the transport of heat-sensitive products such as sugar, plastic pellets, and resins.

    The BTI trailer mounted air-to-air cooler system cools discharge air to approximately less than half of inlet temperature before the air enters the tank.  An automatic pressure sensor switch controls the fans, eliminating possible operator failure to activate the fans.


    Cooler 1

    Part Number 251-058-000: standard air cooler, with 4-inch intake and discharge nozzles on side opposite fans.

    Cooler 2

    Part Number 251-059-000: optional air cooler, with 4-inch intake and discharge nozzles on same side as fans.

    Advantages of the BTI Trailer Air-to-Air Cooler are:

    • Provides cooled air to the dry bulk material.
    • Cooler is automatic - no special procedure is required.
    • Virtually maintenance free.
    • Requires no external water, air, or electric source.
    • Victaulic groove on the piping stub coming from the cooler, intake and discharge ports.
    • Compact, light, inexpensive, and does not affect the size of the trailer.
    The BTI Trailer Mounted Air-to-Air cooler system cools discharge air to approximately less than half of inlet temperature before the air enters the tank. The cooler’s heat exchanger is rated for 1100 SCFM and is equipped with two electric fans that are powered by the tractor’s electrical system, using the 7-pin harness at the front of the trailer. The cooler is installed in the air supply line between the blower and the hopper tank, allowing the conveying air to be routed through the heat exchanger, and cooled by the fans. An automatic pressure sensor switch controls the fans, eliminating possible operator failure to activate the fans.
    The cooler kit includes the heat exchanger, electric fans, insulating bushings, fan switch, and thermometers.